This section shows WebCAM System Information such as the Hardware and
Firmware Version, the serial number, current / local System Time, the system
name, contact, location and uptime. These values are either provided by
WebCAM or set by user.
ii.
System Information
This section shows WebCAM Network settings.
to every WebCAM.
2.2.2 Current Connections
This section will show all the users currently viewing either Camera A or Camera B.
It also lists, the login time, and total bytes received.
the IP or even disable the account of any errant viewer (The administrator privilege
will be required for this feature).
same time.
Note: If you do not have Administrator's privilege, the IP and Account details will be
hidden.
WebCAM user manual
Fig.15. WebCAM System Status
All the other values are set by the user in Setup Wizard.
A total of 10 connections can be displayed at the
Chapter 5: Web Manager
The MAC Address is unique
The user has an option to block
-25-