Multi-Display Systems; Connecting The Monitor - HP 744 Owner's Manual

Connecting a Single Monitor, Multi-Display System, or Text-Only Terminal
Table 4-1 lists the video conversion cables required to connect a monitor to a
video connector.
Table 4-1 Monitor Conversion Cables Required
Graphics Type
On-board graphics

Multi-Display Systems

HP-UX 10.20 ACE and later supports up to four monitors simultaneously.
See the Graphics Administration Guide (B2355-90109) for more informa-
tion about setting up multiple displays.

Connecting the Monitor

This section provides step-by-step instructions for connecting a monitor to
your Model 744 Board Computer with on-board graphics or PMC graphics.
Refer to Figure 4-2 for help when connecting your monitor.
CAUTION: Some CRT-based monitors are heavy. Use caution when lifting and
unpacking the monitor.
Note: On-board connectors require conversion cable.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Cable Type from Monitor
Standard 15-pin EVC connector
connector
A4223A A4305A
On-Board Graphics
Connector
Cables
4-5