GE IO61X-BAT-KIT Safety And Quick Start Manual page 6

Li-ion battery and adaptors for dpi611/2
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Safety and Quick Start Guide
50ABL001 RECHARGEABLE BATTERY CHARGER WARNINGS
Do not disassemble or modify the charger module or DC Power Supply.
The equipment is equipped with built-in safety/protection features. Should
these features be disabled, the battery pack under charge can leak
electrolyte, overheat, emit smoke, burst and/or ignite.
If recharging operation fails to complete even when a specified recharging
time has elapsed, immediately stop further recharging. Otherwise, battery
electrolyte leakage, overheating, smoke emission, bursting and/or ignition
can occur.
The equipment incorporates built-in safety devices. Do not use it in a
location where static electricity (greater than the manufacturer's
guarantee) may be present. Otherwise, the safety devices can be
damaged, possibly leading to overheating, smoke emission, bursting
and/or ignition.
The guaranteed recharging temperature range is 10°C to +45ºC. A
recharging operation outside this temperature range can lead to battery
electrolyte leakage and/or overheating of the battery pack and may cause
damage to it.
Store the equipment in a location where children cannot reach it. Also,
make sure that a child does not take the battery pack out of the
equipment.
Before use, carefully study these Precautions. For further information
contact the nearest distributor or representative. Retain the original
product literature for future reference.
For recharging procedures, refer to the Operation Manual of your
DPI611/612 device.
Do not charge a battery if the battery displays rust, a bad odour,
overheating and/or other irregularities. If the battery is new, it must be
returned to the supplier or vendor.
Page 6 of 11
[EN] English – 109M7337 Rev -
IO61X-BAT-KIT

Advertisement

Table of Contents
loading

Table of Contents