Installation Instructions - HP ProCurve Radio Port 230 Installation And Getting Started Manual

Installation Instructions

The ProCurve Radio Port 230 and 210 can be mounted either on a wall or on
a suspended ceiling T-bar. The radio ports are not designed for mounting on
a desk. The diagrams on the next page note the key installation features.
To prepare for installation, perform the following steps:
1.
2.
3.
4.
See Detail Below
Match the model number on the purchase order with the model numbers
in the packing list and on the case of the shipped device.
Verify that the contents of the box include the intended ProCurve Radio
Port 230 or 210 and mounting hardware:
Radio Port Item
230 J9006A
210 J9004A
Review site survey and network analysis reports to determine the location
and mounting positions for the ProCurve Radio Port 230 and 210.
Connect a CAT-5 cable to a compatible IEEE 802.3af power source and
run the cable to the installation site. Ensure that there is sufficient slack
on the cable to perform the installation steps.
T-Bar Retaining Clip
Notes
802.11a & 802.11b/g integrated antenna
configuration.
802.11b/g integrated antenna configuration.
Wall Mount Slot
T-Bar Suspension Clips
2
2-1