[Cm08] Basic Services - NEC UNIVERGE SV8300 Command Manual

COMMAND CODE TITLE:
08
FUNCTION:
This command is used to assign basic features on a system wide basis.
PRECAUTION:
After setting 1st data 335, 391, 420, 592, 909, system reset is required.
ASSIGNMENT PROCEDURE:
ST + 08 + DE +
DATA TABLE:
BASIC SERVICE: 011-096
011 Operator Monitoring
[Australia Only]
[8300R2]
012 Attendant Override/Busy Verification
[8300R2]
014 Attendant Loop Release
[8300R2]
018 Attendant Night Transfer
[8300R2]
026 Group Diversion
028 C.O. to C.O. transfer by station or attendant
NOTE: This data is effective for C.O. trunks (Ground Start/
Loop Start) which receive a release signal from the
C.O.
029 When tandem call duration passes a predetermined time, the
call is disconnected or continued
(Related Command: CM35 Y=119, CM41 Y=0>54)
BASIC SERVICES
BASIC SERVICE
+ DE
FEATURE
(3/4 digits)
BASIC SERVICE
DATA (0/1)
+ + EXE
(1 digit)
0 Not available
1 Available
0 Not available
1 Available
0 Available
1 Not available
0 Not available
1 Available
0 Available
1 Not available
0 To allow
1 Not allowed
0 To disconnect
1 To continue
3-33
: Default
SETTING DATA
See CM51 Y=13
See CM16 Y=2 CM19 Y=6
Continued on next page
NWA-033623-001 Rev.8.1
91ch3001.fm
JANUARY/31/2012
CM08