NEC UNIVERGE SV8300 Command Manual page 428

COMMAND CODE TITLE:
42
KIND OF SYSTEM COUNTER/PAD DATA
181 Maximum number of Wake Up Call setting at
the same time
NOTE:
Assign the maximum number of Wake Up Call for the same time per every minute.
182 Time for monitoring long call duration of
trunk call
NOTE: When the call time exceeds the time set by this command, a fault information is stored as long-time
call fault.
183 Maximum number of simultaneous calling of
each blade for SLT
[8300R2]
185 Date to total the call charge
[For EU]
NOTE: From the 26th to the day before end of month cannot be assigned.
186 Room Status Code set by Check In operation
187 Room Status Code set by Check Out operation
188 Room Status Code when pressing Call
Recording Function Button
190 Setting of PAD data for a Station-to-Station
call
SYSTEM COUNTER DATA/PAD DATA
SETTING DATA
01 1 call
32 32 calls
NONE No limit
01 1 hour
60 60 hours
NONE 60 hours
01 1 call
16 16 calls
NONE 4 calls
01 The 1st of the month
25 The 25th of the month
NONE End of month
01 Room Status Code 1
08 Room Status Code 8
NONE Not used
01 -15 dB/-15 dB
15 -1 dB/-1 dB
16 0 dB/0 dB
17 +1 dB/+1 dB
31 +15 dB/+15 dB
NONE -6 dB/-6 dB
+: Gain
- : Loss
3-372
: Default
REMARKS
CM08>850
CM35 Y=286
CMEA
Y=2>04A
(1 dB increment)
(1 dB increment)
Continued on next page
NWA-033623-001 Rev.8.1
CM42
91ch3004.fm
JUNE/15/2011