Table of Contents
Advertisement
4. Set the control terminal to the same settings as this board.
n
This board's setting is as follows:
Setting Item
Setting
Speed
9600 bps / 38.4 kbps
Start Bit
1
Data Bits
8
Parity Bit
None
Stop Bit
1
5. Press x key with pressing Ctrl key from the control terminal. (Ctrl_x)
To return to System Status Screen, press Ctrl_x key.
When starting the setting (Menu Screen)
SONY ROUTING SYSTEM SETUP MENU
A: DISPLAY CONTROL AREA
C: SET DESTINATION NAME
E: SET LEVEL TABLE
G: UPDATE BACKUP CONTROLLER
J: NAME STYLE (Type + Num)
L: SET PHYSICAL ASSIGNMENT
N: SET DESCRIPTION NAME GROUP
P: CHANGE PASSWORD
R: CALL SECONDARY STATION
———————————————
U: SELECT CONTROL MODE
W:SYSTEM STATUS LOG
Y: DISPLAY TABLE DATA
Ctrl _ X: QUIT SETUP MENU
For the remainder of the setup procedure and the setting data backup (BZR-10 supplied with BKPF-R70
is used), refer to the installation manual of ROUTING SWITCHER SYSTEM.
BKPF-R70
BKPF-R70 V1.00
MODIFICATION COMMAND
B: SET SOURCE/DEST TYPE
D: SET SOURCE NAME
F: SET ACTIVE UNIT NUMBER
H: SET GLOBAL PHANTOM
K: RESET TO DEFAULT TABLE
M:SET INHIBIT TABLE
O: SET TIE LINES
Q: CHANGE CROSSPOINT
MAINTENANCE COMMAND
T: SET CLOCK
V: SELECT WARNING DISPLAY (ON)
X: DISPLAY S-BUS COMMUNICATION
Z: SET UNIT DETECTABLE
STATION NUMBER 1
1-10. Setup
1-13 (E)
Advertisement
Table of Contents
