92 Operation
Overview on drive status and sequences
The following section lists the main operating states of the drive and the related indications
on the local control panel when the drive is put into operation (see
drive), when it is stopped (see
occurred.
For information on other status messages, such as fault status messages in particular, see
the
ACS580MV primary control program firmware
Status indications
The drive status is indicated with a status icon on the control panel.
Status icon
Animation
-
-
Blinking
Blinking
Flashing
Rotating
Rotating
Stop sequence of the
drive), or when a fault condition has
manual.
Stopped
Stopped, start inhibited
Stopped, start command given but start inhibited
Faulted
Running, at reference, but the reference value is 0
Running, not at reference
Running, at reference
Start sequence of the
Drive status