Table of Contents
Advertisement
Electra Elite
System Hardware Manual
2.
Insert cable into the AD(A)-R Unit terminal, fit a cap
(included with the Unit) over the cable and push to
anchor it as shown in
Installation. The core cable should be inserted with
its cover. The shielded cable should be bundled
before inserting it in the terminal.
3.
Feed the installed cable out through the CN2
window as shown in
Figure 8-49 Core Cable Installation
Figure 8-50 Cable Access Port
Figure 8-49 Core Cable
Figure 8-50 Cable Access
Issue 6
Port.
8 - 37
Advertisement
Table of Contents
