Figure 8-20 Removing Base Cover - NEC ElectraElite 48 System Hardware Manual

Electra Elite
S 9
ECTION
R
EMOVING OR
I B
NSTALLING THE
C
OVER
System Hardware Manual
To remove the Base Cover proceed as follows:
ASE
1.
2.
To install the Base Cover, place the four tabs in their applicable slots, and
pull the cover in the direction of the arrows until it clicks in place.
Extend the Base Cover.
Press tabs shown on
slide the Base Cover in the arrow direction until it clicks.

Figure 8-20 Removing Base Cover

Figure 8-20 Removing Base
Issue 6
Cover, and
8 - 17