Husqvarna Automower 310 Operator's Manual page 26

®
For Automower 315X the GPS Assisted
Navigation helps the product to select the most
optimal operation. However, in more complex
gardens operation can be improved by carrying
out some of the manual settings in the
coverage menu.
3.9.5.1 To disable the GPS Assisted Navigation
®
Only for Automower 315X.
Disable the GPS Assisted Navigation to make
Lawn coverage .
manual settings in
Note: It is recommended to use GPS Assisted
Navigation.
To get access to the menu
1. Do steps 1–3 in
on page 23 .
2. Use the arrow buttons and the OK button to
move through the menu structure
> Lawn coverage .
3. Use the down arrow button to select
GPS navigation .
4. Push the OK button.
5. Use the right arrow button to select
with disable GPS navigation?
6. Push the OK button.
3.9.5.2 To enable the GPS Assisted Navigation
®
Only for Automower 315X.
To disable the GPS
1. Do steps 1–4 in
Assisted Navigation on page 26 .
2. Use the down arrow button to select
GPS navigation .
3. Push the OK button.
26 - Installation
4. Push the BACK button.
3.9.5.3 To set the Lawn coverage function
1. Do steps 1–3 in
on page 23 .
2. Use the arrow buttons and the OK button to
move through the menu structure
> Lawn coverage > Area 1-3 > How?
3. Use the left arrow button to select the area.
4. Push the OK button.
5. Push the BACK button.
6. Use the arrow buttons and the OK button to
move through the menu structure
> Lawn coverage > Area 1-3 > How far?
7. Measure the distance from the charging
station to the start of the area. Measure
along the guide wire. Refer to
the distance from the charging station on
page 27 .
Lawn
8. Push the arrow buttons to select the
distance, measured in m.
9. Push the BACK button.
10. Use the arrow buttons and the OK button to
move through the menu structure
> Lawn coverage > Area 1-3 > How often?
11. Use the arrow buttons to select the % of the
cutting time the product must cut the area.
The % is equal to the % of the area in
relation to the complete work area.
a) Measure the area.
b) Divide the area with the work area.
c) Convert the result to %.
Installation
Disable
20%
Proceed
30%
Enable
To get access to the menu
Installation
Installation
To measure
Installation
1220 - 001 -