Parameter Window: "Function - ABB i-bus EIB Product Manual

®
ABB i-bus EIB / KNX
4.5.4 Parameter window:
"Function"
© 2004 ABB STOTZ-KONTAKT GmbH
Project design and programming
Parameter: "Enable monitoring of the room thermostat"
The cyclical monitoring of the room thermostat can be enabled here. The
failure of the room thermostat can thus be detected. The output then
switches to fault mode and moves to a defined position.
Parameter: "Enable function 'fan speed limitation'"
This function enables e.g. noise reduction via the bus during operation at
night.
Parameter: "Enable function 'forced operation'"
The forced operation of the fan speed and the valve position can be enabled
here in order to move outputs into a specific position e.g. for inspection
purposes.
55