Pioneer CX-3250 Service Manual page 139

5
34. Back Camera Test
Confirm the signal line for back camera image is valid.
"Back Camera Image" which was input from Camera Image Input Terminals at rear panel of the product is displayed.
1. Display via DECORDER
This is the screen when back camera image is under display.
The following error message is displayed when error happens;
Case: Back Camera ON setting was unsuccessful.
In the case microcomputer communication was unsuccessful.
2. Display Directly
This is the screen when back camera image is under displa
The following error message is displayed when error happens;
Case. Failed to Setup BackCamera.
In the case microcomputer communication was unsuccessful.
5
6
AVIC-X930BT/XNUC
6
7
7
8
A
B
C
D
E
F
139
8