Pioneer CX-3250 Service Manual page 118

1
3-2. Execute
After the necessary setting is completed, select [2. Execute] from Output Frequency Channel Extended
A
Test menu, then the set radio wave is emitted by depressing [MODE] key.
*The set content is able to be confirmed on the screen by depressing [HOME] key after selecting [1. Parameter Setting].
B
Please start the measurement.
Return to Output Frequency Channel Extended Test menu with [HOME] key.
Setting Value of Output Frequency Channel Extended Test
C
1. Test Scenario
0. Switch Off
1. TX Burst Mode
2. RX Burst Mode
3. RX Burst Mode with Data transparently sent to host
4. RX Burst Mode with Bit & Packet Error Measurement Mode
2. Packet Type
4. DH1
11. DH3
15. DH5
36. 2-DH1
40. 3-DH1
42. 2-DH3
D
43. 3-DH3
46. 2-DH5
47. 3-DH5
3. Bit Pattern
1. All 0 Pattern
2. All 1 Pattern
3. 1010 Pattern
4. PRBS-9 Sequence
9. 11110000 Pattern
10. 1100 Pattern
4. Single Frequency
2402 + (00-93) MHz Value in parenthesis is able to be set arbitrarily.
E
5. TX Burst Period
(002-254) Value in parenthesis is able to be set arbitrarily
6. Scrambler Mode
0. OFF
1. ON
7. Power Level
0. Power Level 0
1. Power Level 1
2. Power Level 2
3. Power Level 3
4. Power Level 4
F
118
1
2
AVIC-X930BT/XNUC
2
3
3
4
4