Communication method
Open the connection from the client side, and execute the command request.
When the server receives the command request, it returns the command response to the client side.
To request commands using EtherNet/IP Configuration Tool, use the "Online Action" window.
1.
Start EtherNet/IP Configuration Tool, and set the IP address on the server side.
Select the RJ71EIP91 in the EtherNet/IP setting
2.
Switch EtherNet/IP Configuration Tool to the online state.
Select the EtherNet/IP device in the network configuration settings.
3.
Execute the command request of Class3 message communications in the "Online Action" window.
[Network]
[Online Action]
For details on the setting window, refer to the following.
Page 62 "Online Action" window
Commands for message communications can be requested from software made by other companies. When
requesting commands from software made by other companies, refer to the manual of the software used.
[Description]
[Properties]
[File]
[Go Online]
1.1 EtherNet/IP Communication Functions
1
1 FUNCTIONS
37