Connecting Lan Cable - NEC DT830 Series User Manual

CONNECTING LAN CABLE

DT830
STEP 1: Prepare 10 BASE-T/100 BASE-T/TX
1000BASE-T (8LDG only) cables (Straight)
for connecting the telephone to network de-
vice such as HUB, PoE Switch.
STEP 2: Connect the telephone to the network device
using the LAN cable.
STEP 3: Thread the LAN cable through the groove on
the back of the telephone.
Telephone
LAN Straight Cable
STEP 4: When AC adapter is used to supply power to
To LAN
To PC
Groove
27
the telephone, connect the AC/DC adapter to
the telephone as shown below.
LAN Straight Cable
Groove
Telephone