To Leave A Message - NEC DT830 Series User Manual

STEP 5: Save&Rep LED lights.
Using Soft Key
STEP 1: Press Save&Rep. Number is stored in mem-
ory.
STEP 2: Save&Rep LED lights.
To Verify (Only For Terminal With LCD)
STEP 1: While idle, press Save&Rep.
STEP 2: Display indicates digits sorted.
To Repeat
Speaker
STEP 1: Press
STEP 2: Press Save&Rep. DT Series automatically
redials the programmed number.
STEP 3: Save&Rep automatically cancelled. LED
goes out.
Note: If saved number is busy or no answer is received,
to save it again, press Save&Rep again before
hanging up.
Using Soft Key
STEP 1: Press flashing Save&Rep soft key. Stored
number is
"Save&Rep" disappears from display.
key.
automatically redialed.

TO LEAVE A MESSAGE

DT830 DT430/410
Speaker
STEP 1: Press
STEP 2: Dial desired station number. Encounter no
answer or busy condition.
STEP 3: Press MSG. Message is sent to called DT Se-
ries.
STEP 4: Called station MSG LED lights.
MESSAGE SET
1:25 PM
Note: Up to four messages can be stored in DT Series
memory.
Note:
If a fifth message is attempted, reorder tone is
heard and display indicates as follows:
MESSAGE BUSY
1:25 PM
Note:
If station is not equipped to receive messages,
reorder tone is heard and display indicates as fol-
lows:
MESSAGE REST
1:25 PM
154
key. Receive dial tone.
Called station
2001
MON 22 SEP 2014
MON 22 SEP 2014
MON 22 SEP 2014