Download Print this page
HP Elite Display E190i Disassembly Instructions Manual

HP Elite Display E190i Disassembly Instructions Manual

19-in 5:4 led backlit ips monitor

Advertisement

Quick Links

Product End-of-Life Disassembly Instructions
Product Category: Monitors and Displays
Marketing Name / Model
[List multiple models if applicable.]
HP EliteDisplay E190i 19-in 5:4 LED Backlit IPS Monitor
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
Batteries
Mercury-containing components
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
External electrical cables and cords
Gas Discharge Lamps
Plastics containing Brominated Flame Retardants
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Components and waste containing asbestos
Components, parts and materials containing
refractory ceramic fibers
Components, parts and materials containing
radioactive substances
EL-MF877-00
Template Revision A
Notes
With a surface greater than 10 sq cm
USB BD, IF BD, POWER BD, FK BD
All types including standard alkaline and lithium coin
or button style batteries
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
Includes background illuminated displays with gas
discharge lamps Panel
Power BD only (C805)
USB cable, D-sub cable, DVI cable, Power cord
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
Quantity
of items
included
in product
4
1
1
4
Page 1

Advertisement

loading

Summary of Contents for HP Elite Display E190i

  • Page 1 Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
  • Page 2 2.0 Tools Required List the type and size of the tools that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed. Tool Description Tool Size (if applicable) Description #1 SCREW DRIVER(PHILLIPS HEAD) Description #2 Description #3 Description #4...
  • Page 3 HP E190i Disassembly Process  Stone Zhang  Mechanical Engineer  Aug-12-2013...
  • Page 4 External Electric Cables Dissecting Process Power Cord USB Cable D-SUB DVI Cable 2.Dissecting To Complete. 1.Remove Cable From Display Head.
  • Page 5 Remove Stand from Display Head 2.Remove Stand from Display Head. 1. Release the four screws for Stand to RC...
  • Page 6 Remove Rear Cover From Display Head 5.Remove Rear Cover from Display Head.
  • Page 7 Remove Front Cover From Display Head Remove F/K BD by hand 6.Remove Front Cover.
  • Page 8 Remove Rubber foot From Rear Cover...
  • Page 9 Take Screw(*2) Off From Chassis Cover & Remove Panel 1. Remove connector from Panel 3. Pear off the Aluminum Tape from LVDS connector 2. Remove four screws from Chassis 4.Remove connector off from Panel. 5.Separate the Panel and Metal.
  • Page 10 Take Screw(x7) Off From P.C.B 1. Take Screw(x7) Off From P.C.B...
  • Page 11 Take Screw(x1) Off From USB 1. Take Screw(x1) Off From USB then remove Cable from connector...
  • Page 12 Take Screw(x5) Off From P.C.B 1. Take Screw(x5) Off From P.C.B...
  • Page 13 Take Screw(x5) Off From P.C.B & Remove BKT (Printed Circuit Assemblies>10cm*2)
  • Page 14 Remove Mylar From Chassis Metal...
  • Page 15 LCD PANEL EXPLODE...
  • Page 16 LCD PANEL EXPLODE...
  • Page 17 Electrolytic Capacitors Over 25mm High& Diameter Dissecting Process 3.Dissecting To Complete. 1.Heats Up, Dissolved Tin Lead. 2.Takes Down The Capacitor. (Next Page Have Description)
  • Page 18 Electrolytic Capacitors Process Drawing C805...
  • Page 19 Remove Lock pin...
  • Page 20: Remove Base

    Remove Base Take QR screws off...