Sony RM-AV3000 Operating Instructions (primary manual) Operating Instructions Manual page 69

To clear timer settings
programmed for a specific PROG
(1-12) Label key
1
While pressing COMMANDER
OFF, press MUTING.
2
Press the Mode Display key (SET)
once to display "RESET" on one
of the Label keys on the display.
3
Press the RESET key.
"RESET" appears on the Mode
Display key.
4
Press the TIMER button.
"PROG1" - "PROG4" are displayed.
To change the Label keys, press the
TIMER button.
5
Press the Label key of which
timer settings you want to erase.
The selected program number is
displayed on the left Label key.
6
Press the YES key.
During erasing, "c c" stays lit. When
erasing finishes, "OK" is displayed
with a beep sound.
If you press the NO key
The display returns to Step 4.
7
Press COMMANDER OFF.
COMMANDER
OFF
If you keep COMMANDER OFF
pressed for more than 2 seconds
The Commander turns off.
If you keep COMMANDER OFF
pressed for less than 2 seconds
The Commander returns to the
previously set mode.
Continued
69