Sony RM-AV3000 Operating Instructions (primary manual) Operating Instructions Manual page 27

5
Press the Component Select
button or the Label key of which
preset settings you want to erase.
The component name is displayed on
the left Label key.
6
Press the YES key.
YES
During erasing, "c c " stays lit. When
erasing finishes, "OK" is displayed
with a beep sound.
If you press the NO key
The display returns to Step 4.
If you want to erase the learned
signals for other Component
Select buttons or corresponding
Label keys
Repeat Steps 5 - 6.
7
Press COMMANDER OFF.
COMMANDER
OFF
If you keep COMMANDER OFF
pressed for more than 2 seconds
The Commander turns off.
If you keep COMMANDER OFF
pressed for less than 2 seconds
The Commander returns to the
previously set mode.
To clear all signals learned for all
Component Select buttons or
corresponding Label keys
1
Follow Steps 1 - 3 on page 26.
2
While pressing the DEL key, press
the COMPO key.
COMPO
Continued
27