For Multipoint Data Conference - Sony PCS-G70 Operating Instructions Manual

System Configuration via an ISDN for Multipoint Data Conference
You need to connect the optional PCSA-B384S, PCSA-B768S, or PCSA-PRI
ISDN Unit and the PCSA-DSB1S Data Solution Box especially designed for
use with this System and to install the optional PCSA-M0G70 H.320 MCU
software.
This allows you:
• To hold a multipoint videoconference among up to six sites over ISDN.
• To show still images stored on a "Memory Stick".
• To use the data from a computer or an external equipment.
• To show the data from a computer or still images on the second TV monitor
or projector.
• To pick up a large number of participants' voices using up to five external
microphones connected to the Data Solution Box.
System configuration
1 PCS-PG70/PG70P Communication Terminal
2 PCSA-CG70/CG70P Camera Unit
3 PCS-RG70 Remote Commander
4 TV monitor (not supplied)
5 PCSA-M0G70 H.320 MCU software (not supplied)
6 PCSA-B384S, PCSA-B768S or PCSA-PRI ISDN Unit (not supplied)
7 PCSA-DSB1S Data Solution Box (not supplied)
8 PCS-A1 Microphone (not supplied)
*
The illustration shows an
example using the PCSA-B768S
ISDN Unit.
System Configuration
21