Selecting the Input Picture and Sound
This section describes how to switch the picture displayed on the monitor
screen, and how to switch the input picture and sound.
Switching the Displayed Picture Between the Local and Remote
Pictures
1
Press the FAR/NEAR button on the Remote Commander.
The Display Control menu appears.
2
Use the V, v, B or b button on the Remote Commander to select "Near" or
"Far" under "Display".
Display Control
3
Press the PUSH ENTER button on the Remote Commander.
Selecting the Input Picture
1
Press the VIDEO INPUT SELECT button on the Remote Commander.
The Video Input Select menu appears.
2
Use the V, v, B or b button on the Remote Commander to select the video
input on the local site.
Note
While in communication you can switch the video input of the remote system by
selecting "Far" in the Video Input Select menu.
100
Selecting the Input Picture and Sound
Display
Control
Near
Far
Camera