Sony 3-289-204-41(1) Operating Instructions Manual page 7

Name
A POWER
ON/STANDBY
lamp
B TONE MODE
TONE +/–
C TUNING MODE Press to select the
D TUNING +/–
E Remote
sensor
F MULTI
CHANNEL
DECODING
lamp
G Display
window
H Digital Cinema
Sound lamp
I DISPLAY
Function
Press to turn the
receiver on or off.
Lights up in green
when the receiver is
turned on. Lights up in
red when the receiver is
set to standby mode.
Adjusts the tonal
quality (bass/treble
level) of the front,
center and surround
speakers. Press TONE
MODE repeatedly to
select bass or treble
level, then turn TONE
+/– to adjust the level
(page 98).
tuning mode
(page 104, 105).
Turn to scan a station
(page 104, 105).
Receives signals from
remote commander.
Lights up when multi
channel audio signals
are decoded.
The current status of
the selected component
or a list of selectable
items appears here
(page 91).
Lights up when a sound
field with D CS is
selected (page 63).
Press repeatedly to
select information
displayed on the
display.
Name
J INPUT MODE
K MASTER
VOLUME
L INPUT
SELECTOR
M 2CH/A.DIRECT Press to select sound
A.F.D.
MOVIE
MUSIC
N DIMMER
O MEMORY/
ENTER
P AUTO CAL MIC
jack
Q VIDEO 2 IN/
PORTABLE AV
IN jacks
R SPEAKERS
(OFF/A/B/A+B)
S PHONES jack
Function
Press to select the input
mode when the same
components are
connected to both
digital and analog
jacks.
Turn to adjust the
volume level of all
speakers at the same
time.
Turn to select the input
source to play back.
field (page 103, 104).
Press repeatedly to
adjust brightness of the
display.
Press to store a station
or enter the selection
when selecting the
settings.
Connects to the
supplied optimizer
microphone for the
Digital Cinema Auto
Calibration function
(page 45).
Connect to a portable
audio/video component
such as a camcorder or
video game.
Press to select the
speaker system
(page 44).
Connects to
headphones.
GB
7