Svt-1000P - Sony CCTV Systems Catalog

TIME LAPSE VIDEO RECORDERS
Time Lapse Videocassette Recorder

SVT-1000P

•4 different time lapse recording/playback modes are
available in addition to the standard mode (3 hours
time mode) with a normal 180-minute tape
TIME MODE (h) 3
INTERVAL (s) 1/50
Note: In time lapse modes, it is possible to additionally record three hours longer than the original modes.
•Adaptive Picture Control (APC) delivers optimum
picture quality to the recording image
•A tape recorded in the 3-hour mode can be played
back by any VHS VCR
•Audio recording and playback are possible in 3, 12 and
24-hour modes
•Built-in time and date generator allows time and date
information to be displayed along with the Alarm count
and Recording/Playback speed
•Various recording modes such as Auto Repeat Recording,
Timer Recording and Alarm Recording for versatile situations
•By using alarm recall and scan functions, pictures
recorded during alarm mode can be easily checked
•Holiday setting function
•Daylight Saving Time setting function
•Quick recording check function
•Field-by-field picture playback capability
•External timer input capability
•On-screen display permits easy-to-follow operation
•Auto head cleaning function
•Tape before-end signal output capability
•Warning signal output capability
•Buzzer setting function
•Power-failure protection for up to 30 days
•Security lock function for avoiding accidental operation errors
•External control capability via an optional RS-232C interface
•Remote control capability of basic operational functions
through ø3.5 mm mini jack
50
12 24 48
0.1 0.18 0.34
Rear Panel
Specifications
SVT-1000P
General
Power requirements:
Power consumption:
Operating temperature:
Operating humidity:
Dimensions:
Mass:
Tape speed:
Recording/playback time: 3, 12, 24, 48 and 72 hours (with an E-180 tape)
Alarm recording speed:
Alarm recording duration: 20 s, 1 m, CC*
Fast forward/rewind time: Approx. 4 minutes (with an E-180 tape)
Video
Recording Playback system: Rotary four-head helical scanning system
72
Input:
0.5
Output:
Horizontal resolution:
Signal-to-noise ratio:
Audio
Audio recording mode:
Input:
Output:
Microphone input:
Others
Alarm input:
Alarm output:
Switch output:
Tape end output:
Warning output:
External timer input:
Control terminals:
Notes: * 1 No change of recording speed
* 2 Stays an alarm for as long as the alarm input remains active.
0 dBu=0.775 Vrms
Supplied accessories
AC power cord (1)
Operation manual (1)
Optional accessory
SVT-RM10 Remote Control Unit
RS-232C interface board SVT-RS1A
TLV parts kit TPK-887P
AC 220 to 240 V, 50/60 Hz
18 W
5 to 40°C (41 to 104°F)
Less than 80%
420 (W) x 100 (H) x 349 (D) mm
(16 5 / x 4 x 13 3 / inches)
8 4
Approx. 5.5 kg (12 lb 2 oz)
23.39 mm/sec (3-hour mode)
3, 12-hour mode, NC* 1
2
Luminance signal: FM recording
Colour signal: Low-pass band-pass
transformation direct recording
1.0 Vp-p, 75 Ω, unbalanced, sync negative (BNC type)
1.0 Vp-p, 75 Ω, unbalanced, sync negative (BNC type)
Colour mode: More than 240 TV lines
Black & White mode: More than 320 TV lines
43 dB
3, 12 and 24-hour mode
-7.8 dBu, 47 kΩ, unbalanced (phono jack)
-7.8 dBu, 600 Ω, unbalanced (phono jack)
-60 dBu, 600 Ω (ø3.5 mm minijack)
Low level
+5 V, 5.7 kΩ (Low active)
+5 V, 5.7 kΩ (Low active)
+5 V, 5.7 kΩ (Low active)
+5 V, 5.7 kΩ (Low active)
Low level
ø3.5 mm mini jack
Optional RS-232C interface (D-sub 9-pin)