Sony KP 57WV700 Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Projection TV
  5. KP 57WV700
  6. Operating instructions manual
Sony KP 57WV700 Operating Instructions Manual

Sony KP 57WV700 Operating Instructions Manual

Wide screen
Hide thumbs Also See for KP 57WV700:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Service Manual, Training Manual
http://www.world.sony.com/
Sony Corporation
© 2002 Sony Corporation
Printed in U.S.A.

Operating Instructions

KP-57WV600 KP-65WV600
KP-57WV700 KP-65WV700
4-088-026-11

Advertisement

Table of Contents
loading

Related Manuals for Sony KP 57WV700

Summary of Contents for Sony KP 57WV700

  • Page 1: Operating Instructions

    Sony Corporation © 2002 Sony Corporation Printed in U.S.A. 4-088-026-11 Operating Instructions KP-57WV600 KP-65WV600 KP-57WV700 KP-65WV700...
  • Page 2 WARNING To reduce the risk of fire or shock hazard, do not expose the projection TV to rain or moisture. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION RISQUE DE CHOC ELECTRIQUE, NE PAS OUVRIR PRECAUCION RIESGO DE CHOQUE ELECTRICO NO ABRIR CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
  • Page 3 Owner’s Record The model and serial numbers are located at the rear of the projection TV, below the Sony logo, on the sticker, and also on the TV box (white label). Record these numbers in the spaces provided below. Refer to them whenever you call upon your Sony dealer regarding this product.

  • Page 4: Important Safeguards

    Use only a cart or stand recommended by Sony for the specific model of TV. No part of the TV set should overhang any edge of the TV cart or stand;...
  • Page 5 Ventilation The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To ensure reliable operation of the set, and to protect it from overheating, these slots and openings must never be blocked or covered. ❑...

  • Page 6: For Safety

    For Safety Be careful when moving the projection TV When you place the projection TV in position, be careful not to drop it on your foot or fingers. Watch your footing while installing the projection TV. Carry the projection TV in the specified manner If you carry the projection TV in a manner other than the specified manner and without the specified number of persons, it may drop and a serious injury may be caused.

  • Page 8: Table Of Contents

    Contents Introducing the Projection TV Welcome ... 9 Setting Up the TV Overview ...11 Carrying Your Projection TV...12 Installing the TV ...12 TV Controls and Connectors...13 Basic Connections: Connecting a Cable or Antenna...18 Connecting Optional Equipment ...25 Using the CONTROL S Feature ...42 Setting Up the Channel List ...43 Adjusting the Convergence Automatically (Flash Focus)...44 Adjusting the Convergence Manually ...45...

  • Page 9: Using The Features

    Using the Screen Menu ...76 Using the Channel Menu ...78 Using the Parent Menu...80 Using the Setup Menu ...83 Overview ...87 Glossary ...88 Notes on Using Memory Stick Media ...89 Contacting Sony ...90 Troubleshooting...90 Specifications ...95 Optional Accessories...96 Index ...97...

  • Page 10: Introducing The Projection Tv

    Introducing the Projection TV Welcome Thank you for purchasing the Sony Projection TV. This manual is to be used with the following models: ❑ ❑ ❑ ❑ Package Contents Along with your new projection TV, the package contains a remote control and two AA batteries.
  • Page 11 ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ *High-bandwidth Digital Content Protection ™ Twin View : Using the Multi-Image Driver (MIDX), Twin View allows you to watch two programs side by side, with the ability to zoom in one picture. You can watch pictures from two different sources (1080i, 720p, 480p, and 480i) simultaneously.

  • Page 12: Setting Up The Tv

    Setting Up the TV Overview This chapter includes illustrated instructions for setting up your TV. Topic Carrying Your Projection TV Installing the TV TV Controls and Connectors Basic Connections: Connecting a Cable or Antenna Connecting Optional Equipment Using the CONTROL S Feature Setting Up the Channel List Adjusting the Convergence Automatically (Flash Focus) Adjusting the Convergence Manually...

  • Page 13: Carrying Your Projection Tv

    Carrying Your Projection TV Carrying the TV requires four or more people. The TV is equipped with casters for easy movement on a hard surface. Be sure to move your projection TV using the casters. The TV includes handles that you can use to carry the unit.

  • Page 14: Tv Controls And Connectors

    TV Controls and Connectors To access the front video panel, push up and then release. The panel drops down automatically (KP-57/65WV700 shown). Front Video Controls 1 S VIDEO 2 VIDEO/L(MONO)- Connects to the S VIDEO OUT jack on your camcorder VIDEO 2 INPUT or other video equipment that has S VIDEO.

  • Page 15: Kp-57/65Wv600 Front Panel

    If the LED blinks continuously, this may indicate the TV needs service (see “Contacting Sony” on page 90). When lit, indicates one of the timers is set. When the timer is set, this LED will remain lit even if the TV is turned off.

  • Page 16: Kp-57/65Wv700 Front Panel

    If the LED blinks continuously, this may indicate the TV needs service (see “Contacting Sony” on page 90). When lit, indicates one of the timers is set. When the timer is set, this LED will remain lit even if the TV is turned off.

  • Page 17: Rear Panel

    Rear Panel...
  • Page 18 Primary RF input that connects to your VHF/UHF antenna or cable. 0 CONTROL S Allows the TV to receive (IN) and send (OUT) remote control signals to other Sony IN/OUT infrared-controlled audio or video equipment that has the CONTROL S function.

  • Page 19: Basic Connections: Connecting A Cable Or Antenna

    Basic Connections: Connecting a Cable or Antenna The way in which you will connect your TV varies, depending on how your home receives a signal (cable, cable box, antenna) and whether or not you plan to connect a VCR. If You Are Connecting Cable or Antenna Only ❏...

  • Page 20: Cable Or Antenna Only

    Cable or Antenna For best results, use one of the following connections if you are connecting a cable or an antenna and you: Only ❑ ❑ The connection you choose depends on the cable type you have in your home, as described below. 75-ohm coaxial cable (usually found in newer homes) Cable Type VHF Only or...

  • Page 21: Cable And Antenna Only

    Cable and Antenna For best results, use this connection if you: ❑ Only ❑ Cable Type Cable TV (CATV) and Antenna About Using This Connection with Dual Picture (Twin View, etc.) Features With this connection, you cannot view antenna channels in the right dual picture window.
  • Page 22 Notes on Using This Connection To Do This ... Do This ... Switch the TV’s input Press between the cable and inputs. antenna Receive channels using an antenna, instead of the cable to switch back and forth between the TV’s VHF/UHF and AUX Press to switch to the AUX input.

  • Page 23: Cable Box And Cable Only

    Cable Box and For best results, use this connection if: ❑ Cable Only ❑ With this connection you can: ❑ ❑ About Using This Connection with Dual Picture (Twin View, etc.) Features With this connection, you can use all the dual picture features for unscrambled channels coming directly into the TV’s VHF/UHF input jack.
  • Page 24 To connect the cable box and cable Notes on Using This Connection To Do This ... Do This ... Use the cable box Tune the TV to the channel the cable box is set to (usually channel 3 or 4) and then use the cable box to switch channels.

  • Page 25: Cable Box Only

    Cable Box Only For best results, use this connection if: ❑ ❑ With this connection you can: ❑ About Using This Connection with Dual Picture (Twin View, etc.) Features With this connection, all channels come into the TV through your cable box and only one unscrambled signal is sent to the TV, so you cannot use the dual picture features.

  • Page 26: Connecting Optional Equipment

    Connecting Optional Equipment Use the directions in this section to connect the following optional equipment: If You Are Connecting VCR and Cable VCR and Cable Box Two VCRs for Tape Editing Satellite Receiver Satellite Receiver and VCR DVD Player with Component Video Connectors DVD Player with S VIDEO and Audio Connectors...

  • Page 27: Vcr And Cable

    VCR and Cable For best results, use this connection if: ❑ About Using This Connection with Dual Picture (Twin View, etc.) Features With this connection, you can use all the dual picture features. To connect the VCR and cable Using S VIDEO jacks? See page 25.
  • Page 28 Watch cable channels Press illustration). Set up the TV remote control If you have a non-Sony VCR, you must program the remote control. See to operate the VCR “Programming the Remote Control” on pages 51-52. Activate the TV remote Open the outside cover, as shown on page 50. Then set the A/V slide switch control to operate the VCR to the position you programmed for the VCR.

  • Page 29: Vcr And Cable Box

    VCR and Cable Box For best results, use this connection if: ❑ About Using This Connection with Dual Picture (Twin View, etc.) Features With this connection, you can use all the dual picture features. With this connection you can: ❑ ❑...
  • Page 30 Watch the VCR Press illustration). Set up the TV remote control If you have a non-Sony VCR, you must program the remote control. See to operate the cable box or “Programming the Remote Control” on pages 51-52. Activate the remote control to...

  • Page 31: Two Vcrs For Tape Editing

    Two VCRs for Tape Connecting two VCRs lets you record from one VCR to the other. By connecting them as shown below, you can view (monitor) what is Editing being recorded. Using To connect two VCRs for tape editing S VIDEO jacks? See page 25.
  • Page 32 Press recorded illustration above). Set up the TV remote control If you have a non-Sony VCR, you must program the remote control. See to operate the VCR(s) “Programming the Remote Control” on pages 51-52. Activate the TV remote Open the outside cover, as shown on page 50. Then set the A/V slide switch control to operate the VCR(s) to the position you programmed for the VCR.

  • Page 33: Satellite Receiver

    Satellite Receiver To connect a satellite receiver Using S VIDEO jacks? See page 25. Connect the satellite antenna cable to the satellite receiver’s satellite input jack. Use an A/V cable to connect the satellite receiver’s A/V output jacks to the TV’s A/V input jacks. Connect a CATV cable from your cable or antenna to the TV’s VHF/UHF jack.
  • Page 34 Do This ... Press TV/VIDEO repeatedly to select the satellite receiver input (VIDEO 1 in the illustration). If you have a non-Sony satellite receiver, you must program the remote control. See “Programming the Remote Control” on pages 51-52. Press SAT/CABLE FUNCTION.

  • Page 35: Satellite Receiver And Vcr

    Satellite Receiver To connect a satellite receiver and VCR and VCR Using S VIDEO jacks? See page 25. A/V cable Connect the satellite antenna cable to the satellite receiver’s satellite input jack. Connect the CATV cable to the VCR’s VHF/UHF input jack. Use a coaxial cable to connect the VCR’s VHF/UHF output jack to the TV’s VHF/UHF jack.
  • Page 36 Press (VIDEO 1 in the illustration). Set up the TV remote control If you have a non-Sony VCR or satellite receiver, you must program the to operate the satellite remote control. See “Programming the Remote Control” on pages 51-52. receiver or VCR...

  • Page 37: Dvd Player With Component Video Connectors

    DVD Player with For best results, use this connection if your DVD player has component video (Y, P Component Video Connectors To connect a DVD player with component video connectors DVD player Cables are often color-coded to connectors. Connect red to red, white to white, etc.
  • Page 38 Watch the DVD player Press illustration). Set up the TV remote control If you have a non-Sony DVD player, you must program the remote control. to operate the DVD player See “Programming the Remote Control” on pages 51-52. Activate the TV remote Open the outside cover, as shown on page 50.

  • Page 39: Dvd Player With S Video And Audio Connectors

    Watch the DVD player Press illustration). Set up the TV remote control If you have a non-Sony DVD player, you must program the remote control. to operate the DVD player See “Programming the Remote Control” on pages 51-52. Activate the TV remote Open the outside cover, as shown on page 50.

  • Page 40: Digital Tv Set-Top Box With Component Video Connectors

    Digital TV Set-Top To connect a digital TV set-top box with component video connectors Box with Component Video Connectors Digital TV Set-Top Box Cables are often color-coded to connectors. Connect red to red, white to white, etc. Notes on Using This Connection To Do This ...

  • Page 41: Camcorder

    Camcorder For easy connection of a camcorder, the TV has front A/V input jacks. If you prefer, however, you can connect the camcorder to the TV’s rear A/V input jacks. Using To connect a camcorder S VIDEO jacks? See page 25. TV Front Video Panel If you have a mono camcorder, connect its audio output jack to the TV’s L MONO audio jack.

  • Page 42: Audio Receiver

    Audio Receiver For improved sound quality, you may want to play the TV’s audio through your stereo system. To connect an audio system Receiver Use an audio cable to connect the TV’s audio output jacks to the audio receiver’s line input jacks. Audio cable To line input Using the TV’s Audio Menu, set the...

  • Page 43: Using The Control S Feature

    Using the CONTROL S Feature CONTROL S allows you to control your system and other Sony equipment with one remote control. In addition to allowing you to control multiple devices with one remote control, the CONTROL S feature allows you to always point your remote control at your TV, instead of having to point it at the other equipment, which might be hidden or out of direct line of sight.

  • Page 44: Setting Up The Channel List

    Setting Up the Channel List After you finish connecting your TV, you need to run Auto Setup to set up your channels. The Auto Setup screen appears when you turn on your TV for the first time after hooking it up. If you do not want to set up the channels at this time, you can do it later by selecting the Auto Program option in the Channel Menu (see page 78).

  • Page 45: Adjusting The Convergence Automatically (Flash Focus)

    Adjusting the Convergence Automatically (Flash Focus) The projection tube image appears on the screen in three colors (red, green and blue). If they do not converge, the color is poor and the picture blurs. Before you use your TV, be sure to adjust the convergence.

  • Page 46: Adjusting The Convergence Manually

    Adjusting the Convergence Manually The Convergence feature gives you more control over the picture’s convergence than the Flash Focus feature, allowing you to fine-tune the convergence. ✍ For details on using the Setup Menu, see page 83. Before using the manual Convergence, you must first perform Flash Focus (as described on page 44).

  • Page 47: Notes On Adjusting The Convergence Manually

    Notes on ❑ Adjusting the Convergence Manually ❑ ❑ For best results, stand about 3 to 5 feet back from the picture when adjusting the convergence. Begin with the crosses in the center area of the screen and, once those are adjusted, move to the crosses on the edges of the screen.

  • Page 48: Using The Remote Control

    Using the Remote Control Overview This chapter describes how to set up, program, and use the TV’s remote control. Topic Inserting Batteries Button Descriptions Programming the Remote Control Inserting Batteries ✍ Outside Panel Inside Panel Remove the battery cover from the remote control. Insert two size AA (R6) batteries (supplied) by matching the e and E terminals on the batteries to the diagram inside the battery compartment.

  • Page 49: Button Descriptions

    Button Descriptions Outside Panel MUTING SLEEP SAT/CABLE POWER FUNCTION SAT/CABLE TV/VIDEO PIC MODE JUMP ENTER INDEX MENU MODE PALETTE RESET DISPLAY FAVORITES GUIDE CODE SET RM-Y188 Button Description 1 MUTING Press to mute the sound. Press again or press restore the sound. 2 SLEEP Press repeatedly until the TV displays the time in minutes (15, 30, 45, 60, or 90) that you want the TV to...
  • Page 50 Display off. wf GUIDE* Press to display the program guide of your satellite program provider. Requires that you first program the remote control (page 51), if not Sony brand. Vivid, Standard, Movie, Pro. Also available ENTER to change channels...
  • Page 51 VCR or DVD player, depending on the position of the A/V slide switch. For details, see page 51. VCR and DVD buttons require that you first program the remote (page 51), if the VCR and DVD player are not Sony brand. Button Description...

  • Page 52: Programming The Remote Control

    8 mm VCR VHS VCR DVD player MUTING SLEEP SAT/CABLE POWER If you have video equipment other than Sony brand that you want to control with the TV’s remote control, use the following procedure to TV/VCR VCR/DVD SYSTEM program the remote control.
  • Page 53 Manufacturer’s Codes VCRs Manufacturer Code Sony 301, 302, 303 Admiral (M. Ward) Aiwa 338, 344 Audio 314, 337 Dynamic Broksonic 319, 317 Canon 309, 308 Citizen Craig 302, 332 Criterion Curtis Mathes 304, 338, 309 Daewoo 341, 312, 309 314, 336, 337...

  • Page 54: Using Other Equipment With Your Tv Remote Control

    To Do This ... Switch the TV’s input to the VCR, DVD player, or other connected equipment Set up the TV remote control to operate non-Sony equipment Operating a VCR To Do This ... Activate the remote control to operate the VCR...

  • Page 55: Operating A Cable Box

    Operating a Cable To Do This ... Activate the remote control to operate the cable box Turn on/off Select a channel Change channels Back to previous channel Operating a DVD To Do This ... Player Activate the remote control to operate the DVD Play Stop Pause...

  • Page 56: Overview

    Using the Features Overview This chapter describes how to use the features of your TV. Topic Watching TV Using the Scrolling Index Using Wide Mode Using Twin View Using Favorite Channels Using the Freeze Function Using the Memory Stick Picture Viewer Page...

  • Page 57: Watching Tv

    Watching TV To Do This ... For a complete list of all Activate the remote control to the functions of the remote operate the TV control, see pages 47-52. Turn on/off the TV Tune directly to a channel Adjust the volume Mute the volume Alternate back and forth between two channels...

  • Page 58: Using The Scrolling Index

    Using the Scrolling Index The Scrolling Index lets you select programs from a scrolling index of video pictures. To exit the Scrolling Index ❑ Factors Affecting Scrolling Index ❑ Scrolling Index feature does not function if you use a cable box to view all channels. ❑...

  • Page 59: Using Wide Mode

    Using Wide Mode Wide Screen mode lets you watch 4:3 normal broadcasts in several Wide Screen modes (16:9 aspect ratio). ✍ ❑ You can also access the Wide Mode settings in the Screen menu. For details, see page 76. When you change channels or inputs, the Wide Mode settings revert to the 4:3 Default setting in the Screen...

  • Page 60: Using Twin View

    Using Twin View Twin View lets you see two pictures from two sources — from an antenna, VCR, DVD, etc. — on the screen at the same time. You hear the sound from only one of the sources at a time, but you can choose which source’s sound is selected.

  • Page 61: Activating The Picture

    Activating the To activate the picture in the right Picture window ❑ Functions Available in the Active (Highlighted) Window To Do This ... Tune to a channel Adjust the volume Mute the volume Switch the TV’s input between sources connected to the TV’s VHF/UHF and AUX inputs Switch the TV’s input between sources connected to the TV’s...

  • Page 62: Changing The Picture Size

    Changing the The zoom feature lets you vary the relative size of the left and right pictures. Picture Size When you adjust the picture sizes, the TV memorizes the change. The next time you use the Twin View function, the memorized sizes appear.

  • Page 63: Using Favorite Channels

    Using Favorite Channels The Favorite Channels feature lets you select programs from a list of up to eight favorite channels that you specify. Creating a List of Favorite Channels For details on using the Channel Menu, see page 78. Displaying a List of Favorite Channels To assign Channel Labels...

  • Page 64: Using The Freeze Function

    Using the Freeze Function picture. You can use this feature to write down information such as phone numbers, recipes, etc. ✍ button allows you to temporarily capture a program’s FREEZE The Freeze feature is not available while you are using the Twin View or Scrolling Index features.

  • Page 65: Using The Memory Stick Picture Viewer

    “Notes on Using Memory Stick Media” on page 89. Supported Image This TV’s Memory Stick viewer can display only still images that Types have been recorded on Memory Stick media by Sony brand digital still and video cameras. ✍ Recorded images must also meet the following specifications: ❑...

  • Page 66: Unsupported Image Types

    About DCF File Names Most Sony brand digital still and video cameras automatically record still images using DCF compliant directory and file names, as shown in the following example: ✍ Unsupported This TV’s Memory Stick viewer cannot display any of the following: Image Types ❑...

  • Page 67: Inserting And Removing A Memory Stick

    Inserting and To insert a Memory Stick Removing a Memory Stick ✍ To remove a Memory Stick When removing the Memory Stick, do not attempt to just pull it from its slot. Follow steps 1-3 (right). ✍ Locate the Memory Stick slot (see pages 14-15) and insert the Memory Stick into the Memory Stick slot as illustrated below.

  • Page 68: Displaying The Memory Stick Menu

    Displaying the Memory Stick Menu ✍ Insert a Memory Stick that contains the images you want to view. For details, see page 66. Press the button on the remote control. The Memory MEMORY STICK Stick Menu appears. Memory Stick Index Slideshow Setup Move:...

  • Page 69: Using The Memory Stick Index

    Using the Memory The Memory Stick Index lets you view images that are on the Memory Stick in an index of thumbnail images. Stick Index ✍ The Page and folder ( buttons are available only if the Memory Stick contains more images or folders than can be displayed on one screen.

  • Page 70: Using The Memory Stick Slideshow

    Using the Memory The Memory Stick Slideshow lets you watch a slideshow of the images that are on the Memory Stick. Stick Slideshow Changing the Memory Stick Setup Options Insert a Memory Stick that contains the images you want to view. For details, see page 66.

  • Page 71: Using The Rotate Picture Screen

    Using the Rotate The Rotate Picture Screen lets you rotate an image from an index of thumbnails. Picture Screen ✍ The Page and folder ( buttons are available only if the Memory Stick contains more images or folders than can be displayed on one screen.

  • Page 72: Using The Menus

    Using the Menus Overview The Menu gives you access to the following features: Menu Icon Press MENU to enter and exit Menus. Navigating Through Menus To Do This ... Display the Menu Move through the Menus Move through the Menu options Menus include navigation Select an option to change help text that appears at the...

  • Page 73: Using The Video Menu

    Using the Video Menu To select the Video Menu To restore the factory default settings for the Video settings (excluding Advanced Video) of the Mode (Vivid, Standard, etc.) the TV is set to: ❑ Selecting Video The Video Menu includes the following options: Options Option Mode...
  • Page 74 Option ClearEdge VM Velocity Modulation Advanced To change quickly from one Video DRC Mode to another, use the DRC MODE button on the remote control. Advanced Video options are not available (grayed out) when watching 480p, 720p, and 1080i sources. To change quickly from one DRC Palette to another, use the DRC PALETTE...

  • Page 75: Using The Audio Menu

    Using the Audio Menu To select the Audio Menu To restore the factory default settings for Treble, Bass, and Balance ❑ Selecting Audio The Audio Menu includes the following options: Options Option Treble Bass Balance Steady Sound To change quickly from one Effect Effect to another, use the button on the inside panel of the...
  • Page 76 Option Description Speaker Select to turn on the TV speakers. Select to turn off the TV speakers and listen to the TV's sound only through your external audio system speakers. Audio Out This option can be set only when the to Off.

  • Page 77: Using The Screen Menu

    Using the Screen Menu To select the Screen Menu Selecting Screen The Screen menu includes the following options: Mode Options Option Wide Mode To change from one Wide Select a Wide Mode to another, use the WIDE Mode to use for MODE button on the remote 4:3 sources.
  • Page 78 Option 4:3 Default If 4:3 Default is set to Select the default anything but Off, the Wide Mode Screen Mode to setting changes only for the use for 4:3 sources current channel. When you change channels (or inputs), Wide Mode is automatically replaced with the 4:3 Default setting.

  • Page 79: Using The Channel Menu

    Using the Channel Menu To select the Channel Menu Selecting Channel The Channel Menu includes the following options: Options Option Favorite Channels Cable Channel Fix Useful when you have a cable box or satellite receiver connected Auto Program Press MENU Move the joystick highlight the Channel icon and press...
  • Page 80 Option Channel Channels that you set to Skip/Add be skipped can be accessed only with the buttons. Channel Label is not available (grayed out) when Channel Label watching 480p, 720p, and 1080i sources. Description Allows you to customize the channel list that appears CH+/- when you use the buttons.

  • Page 81: Using The Parent Menu

    Using the Parent Menu The Parent Menu allows you to set up the TV to block programs according to their content and rating levels. To select the Parent Menu Selecting Parent The Parent Menu includes the following options: Options Option Parental Lock If you are not familiar with Turn ratings...

  • Page 82: Viewing Blocked Programs

    US Models: For US models, the Custom Rating Menu includes the following options. (For Canadian models, see page 82.) Selecting Custom Rating Options Option Movie Rating The Content-Based Ratings are linked to the level of the Age-Based Rating. For example, a program with an Age-Based Rating of TV-PG V (Violence) rating may contain moderate...
  • Page 83 Canadian Models: For Canadian models, the Custom Rating Menu includes the following options. (For US models, see page 81 Selecting Custom Rating Options Option English Rating French Rating U.S.A. Rating Viewing Blocked You can view blocked programs by entering the password. Press the Programs ENTER password.

  • Page 84: Using The Setup Menu

    Using the Setup Menu To select the Setup Menu To move from within one Menu to the main Menu of icons, move the joystick Selecting The Setup Menu includes the following options: Setup Options Option Caption Vision Press MENU Move the joystick highlight the Setup icon and press Move the joystick to highlight...
  • Page 85 Option Video Label Skip label is useful for inputs that do not have equipment connected to them. Language Clock/Timers To go directly to programming Timer 1 or 2, press instead of moving the joystick b. Description Allows you to identify A/V equipment you connected to the TV, such as a VCR, DVD, etc.
  • Page 86 Option Clock/Timers (continued) You can also access Flash Flash Focus Focus by pressing the FLASH FOCUS button on the front panel of the TV. For details, see Convergence pages 14-15. Demo Description Current Time Press to select Current Time. Move the joystick to set the current time (day, hour, and minute).

  • Page 88: Overview

    Other Information Overview This chapter includes the following topics: Topic Glossary Notes on Using Memory Stick Media Contacting Sony Troubleshooting Specifications Optional Accessories Index Page...

  • Page 89: Glossary

    Glossary analog signal A signaling method that uses continuous changes in the amplitude or frequency of an electronic transmission to convey information. aspect ratio Refers to the ratio between the width and height of the screen. This TV has a 16:9 (widescreen) aspect ratio, as opposed to a 4:3 aspect ratio.

  • Page 90: Notes On Using Memory Stick Media

    Notes on Using Memory Stick Media Memory Stick When using Memory Stick media, follow these precautions: Precautions ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ To avoid permanent damage to still image data, do not turn off the TV or remove Memory Stick media from the insertion slot while data is being read (as indicated by the Memory Stick indicator light being on).

  • Page 91: Contacting Sony

    Contacting Sony If, after reading these operating instructions, you have additional questions related to the use of your Sony television, please call our Customer Information Services Center at 1-800-222-SONY (7669) (US residents only) or (416) 499-SONY (7669) (Canadian residents only).

  • Page 92: Remote Control

    There may be more than one code for the equipment that you are attempting to operate. There is a possibility that some non-Sony equipment cannot be operated by your Sony TV remote.You may need to use the equipment’s original remote control.
  • Page 93 If your TV does not turn on, and a red light keeps flashing, your TV may need service. Call your local Sony Service Center. Make sure the power cord is plugged in. Press the POWER button on the front of the TV.
  • Page 94 Audio Problem Possible Remedies ❏ Good picture, ❏ no sound ❏ Cannot gain enough volume when using a cable box ❏ Sound seems weak or insufficient ❏ Cannot raise the volume on external audio speakers ❏ Channels Problem Possible Remedies ❏...
  • Page 95 General Problem Possible Remedies ❏ How to reset TV to factory settings ❏ How to restore Video settings to factory settings ❏ How to restore Audio settings to factory settings ❏ Cannot cycle through the other video equipment connected to the TV ❏...

  • Page 96: Specifications

    Specifications Projection System Picture Tube Projection Lenses Antenna Television System Channel Coverage Power Requirements Inputs/Outputs DVI-HDTV Video (IN) S Video (IN) Audio (IN) Component Video Input CONTROL S (IN/OUT) Variable/Fixed Audio (OUT) Supplied Accessories Screen Size (measured diagonally) Speaker Output Dimensions (W x H x D) Mass Power Consumption...

  • Page 97: Optional Accessories

    Optional Accessories ❑ A/V Cable (VMC-810/820/830 HG) ❑ Audio Cable (RKC-515HG) ❑ Component Video Cable (VMC-10/30 HG) ❑ Control S Cable (RK-G69HG) ❑ Memory Stick media: 8 MB (MSA-8A); 16 MB (MSA-16A); 32 MB (MSA-32A); 64 MB (MSA-64A); 128 MB (MSA-128A)

  • Page 98: Index

    Index 0-9 buttons 16:9 aspect ratio 4:3 aspect ratio 4:3 Default settings Advanced Video ANT button antenna, connecting Audio Menu Audio Out audio receiver, connecting Auto Program (channel setup) Auto SAP, MTS setting AUX jack, described AV1-3/DVD slide switch balance, adjusting bass, adjusting batteries, inserting in remote bilingual audio...
  • Page 99 features Fixed audio setting Flash Focus FREEZE button Freeze, using Full mode, setting GUIDE button HD Detailer HD/DVD IN (1080i/720p/480p/480i) jacks, described hue, adjusting INDEX button interlaced joystick JUMP button label channels 79 Language, setting LOCK switch, Memory Stick MDP, using with TV remote control Memory Stick Index 68 indicator (LED) 14...
  • Page 100 S VIDEO jack, described SAT/CABLE FUNCTION button SAT/CABLE POWER button satellite receiver, using with TV remote control Scrolling Index, using SELECT button setting up channels Setup Menu sharpness, adjusting Simulated, Effect sizing, picture in Twin View SLEEP button slideshow speakers turning on/off 75 using external speakers 75 specifications...

This manual is also suitable for:

Kp-57wv600Kp-65wv600Kp-65wv700

Table of Contents