Bosch ACS 561 Repair Instructions page 11

ACS 561 Service Manual
Unit Activation
Failure to register and activate the machine
within 30 days of initial startup will cause the
machine to lock out and no longer function.
Select this Setup Menu item and follow the
prompts before the trial period expires.
View Service Data
Displays vehicle information that was entered
into the Enter Service Data screen. Vehicles are
displayed by date of service and VIN number.
The database stores 20 VIN entries.
Refrigerant tracking
Function to memorize the refrigerant amount
recovered and charged for every vehicle.
The display shows five selection options:
• Display: It allows user to show data of
recovered and charged refrigerant.
• Print: It allows user to print out data
as: amount of refrigerant recovered and
charged for every vehicle.
• Export data to SD: It allows user to
extract the report with recovered and
charged refrigerant amount in the
vehicle. Data extraction via SD card,
recommended size 2 GB and FAT format
( s u p p o r t i s n o t p a r t o f s c o p e
delivery). Data are transferred as .csv file.
Pre-requisite is to create a folder in the
support with name U.
• Erase all data: It allows user to erase
all data stored in the A/C unit (password
02762).
• Disable Tracking: It allows user to
disable the Refrigerant tracking function.
Robert Bosch GmbH
Introduction
Initial Setup procedure
The ACS 561 launches into the initial Setup
mode.
Carry out the following setup:
1. Select Language.
2. Select Units.
3. Set Date and Time.
4. Edit Print Header.
5. Service Vacuum.
6. Tank Fill.
At the end of the initial setup procedure it is
suggested to:
• Perform check scale.
• Perform air flow calibration.
NOTE: It is needed to complete all the setup
procedure sequence before to use the A/C unit.
11
SP00D00517 2018-07-11