OPTIGEN® AP3600™ AUTOMATED INSTRUMENT USER MANUAL
•
SN: Serial number for the Pette
•
Panel Name: Panel name for the Pette tested with the sample
•
PC: Positive Procedural Control; a green checkmark appears if the PC in the Pette passed. The PC confirms reagent perfor-
mance and provides a check for correct testing procedure.
•
NC: Negative Blanking Control; a green checkmark appears if the NC in the Pette passed. The NC compensates for non-specific
binding.
Details Screen
The Details screen shows the test results from the selected test.
FIGURE 7-2. Details Screen
Test and Sample Details
Details about the selected test are displayed on the left side of the screen.
Test Details:
•
Date: Date and time the test was completed
•
Pette ID: Unique ID for the Pette tested with the patient sera
•
Panel Name: Common name for the Pette test chamber
•
Result Status: Result status for the test.
Sample Details:
•
Sample ID: Unique ID for the patient sera sample
•
Tested by: User name for the user logged in when the test was run
Test Results
The test results for the selected test are displayed on the right side of the screen. An option to sort the results can be done by pressing
the arrow (highlighted in yellow).
7-2
Results Screen