B.4.1 Enabling/Disabling the GbE boot-from-LAN BIOS firmware
The Gigabit Ethernet boot‐from‐LAN BIOS firmware, provides support for
booting over the network.
NOTE
In order to boot from the network, some operating systems require that the network driver be set to
"boot" within the Control Panel.
The Gigabit Ethernet boot‐from‐LAN BIOS firmware, defaults to Disabled in the
BIOS firmware, Setup Utility. The Chipset menu of the BIOS firmware, Setup
Utility allows the boot‐from‐LAN BIOS firmware, to be Enabled or Disabled.
Table B‐4 on page 93 shows the Chipset Menu. Use the arrow keys to highlight
the Onboard Device Configuration. Select ʹGigE Option ROMʹ in the submenu's
list and enter <+> until the option is set to Enabled or Disabled. Press F10 to Save
and Exit the BIOS firmware, Setup Utility.
Appendix B: BIOS Setup Utility 94
.