Chipset Setup Menu; Table B-4 Bios Chipset Menu - GE OpenVPX VPXcel6 SBC622 Hardware Reference Manual

B.4 Chipset Setup Menu
Main Advanced
Enable CRID
North Bridge Configuration
South Bridge Configuration
93 SBC622 Hardware Reference Manual
Select the various options for chipsets located in the system (for example, the CPU
configuration and configurations for the North and South Bridge). The settings
for the chipsets are processor dependent and care must be used when changing
settings from the defaults set at the factory.
Below is a sample of the Chipset Setup screen; the actual options on your system
may vary.
NOTE
Changes in this screen can cause the system to malfunction. If problems are noted after changes
have been made, reboot the system and access the BIOS firmware. From the Exit menu select 'Load
Failsafe Defaults' and reboot the system. If the system failure prevents access to the BIOS firmware,
screens, refer to Section 1.7.1 Clear CMOS/RTC/Password on page 31 for instructions on clearing
the CMOS.

Table B-4 BIOS Chipset Menu

Aptio Setup Utility - Copyright (C) 2009 American Megatrends, Inc.
Chipset Boot Security
[Disabled]
Version 2.00.1201. Copyright (C) 2009 American Megatrends, Inc.
Save & Exit
Enable Compatible Revision ID
_______________________________________
→← Select Screen
↑↓
Select Item
Enter: Select
+/- Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save ESC: Exit