Login; Logout; Password - GE MDS RCL220 Manual

RCL220_manual_v3-draft.doc
CLEAR Write Only for all users, starting at Administrator. Clear the event log
SHOW Write Only for all users, starting at Administrator. Show the event log
TOTAL= Read Only for all users listed above. Number of event log entries in log.
Read only.
CMD=<cmd> If set to 0, the command executes normally. If <cmd> is set to 1, the
command reports all settings in a format that may be copied into a configuration
script.
3.2.11

LOGIN

Usage: LOGIN
Description: Secure Login. At prompt enter case sensitive <username> = ADMIN |
FACT | ENGR. At prompt enter case sensitive <password>; can be up to 8 characters.
NOTE: CMD=1 command not supported.
Access Level: Logged Out User
Optional Arguments:
none
3.2.12

LOGOUT

Usage: LOGOUT
Description: Log out
NOTE: CMD=1 command not supported.
Access Level: Administrator
Optional Arguments:
none
3.2.13

PASSWORD

Usage: PASSWORD {<username>}
Description: Sets the user login password for user at current access level or less.
NOTE: CMD=1 command not supported.
Access Level: Administrator
05-XXXXA01 Version 3 Draft Page 39 of 79 9/20/2016