Improvement Possible By Changing Optical Density - HP IndiChrome User Manual

Improvement possible by changing optical density

The following message appears:
Undo Measurement window
The choice is as follows:
56 Chapter 4 General procedures
Select To make the improvement . . . and click Apply – change (on the press) the
optical density spec value for the ink to the value given in the Undo Measurement
window (see Changing the optical density (OD) spec value on page 57) and print
another sample page. Measure the color again. (The software resets the ink weights
to the values they had before the measurement.)
Select Let the software try to mathematically account for the error in optical density
and click Apply – the software displays fix can ink weights. Prepare and install the fix
can. Print a new sample page and start the comparison again from 'Adjusting the ink
mix from the printed output' on page 53.
ENWW