The Timer; Setting The Clock - Sony CFD-980 Operating Instructions (English, Español) Operating Instructions Manual

The Timer

Setting the clock

Before you set the clock, connect the AC
power adaptor (see page 25.)
Before you set the clock, "0:00" flashes.
Tip
The time display
system:
24-hour system
CLOCK
1
Press CLOCK for about 2 seconds until the hour
digit flashes.
2
Press TUNING/TIME SET +/– until you set the
current hour. Then press DISPLAY/ENTER•
MEMORY.
The minute digits flash. Set the minutes by
pressing TUNING/TIME SET +/– until the correct
minute is displayed.
3
Press DISPLAY/ENTER•MEMORY.
The clock starts from 00 seconds.
TUNING/TIME DISPLAY/ENTER
SET +/– MEMORY
/
21 EN
The Timer