KX-TVM200E / KX-TVM200NE
*1 If the selected language has no prompts, no prompts will be heard.
Switch Position Operation
Note
When setting the Mode Switch to any position (except 0):
1. Disconnect the station wire(s) and wait a few minutes.
2. Turn the power switch off at the VPS.
3. Set the Mode Switch.
4. Turn the power switch back on at the VPS.
5. Connect the station wire(s) to the VPS and wait approximately 5 min.
6. Return the Mode Switch to position 0.
USB Port
Used to access the VPS via USB.
VM Link (Currently unavailable)
A VPS-PBX connection interface to be implemented in the future via software upgrade.
26