Mitsubishi Electric RD78G4 User Manual page 83

Error Error definition and causes
code
D913H An error was detected in the network
to module.
D917H
D919H No response from the target station of the
communication test.
DA00H An error was detected in the network
module.
DA10H An error was detected in the network
to module.
DA17H
DA19H An error was detected in the network
module.
DB00H The station Nos. of 65 stations or more are
specified.
Action
Please consult your local Mitsubishi representative.
• Correct the IP address, station No., or network No. for the target station of
the communication test.
• Check if the network configuration setting is correctly set in the master
station within the same network as the target station of the communication
test.
• When "IP Address" is selected for "Communication Method",
"Communication Test" cannot be executed for stations on networks
different from that of the connected station (own station). Change
"Communication Method" to "Network No./Station No.".
Please consult your local Mitsubishi representative.
Please consult your local Mitsubishi representative.
Please consult your local Mitsubishi representative.
Check station Nos..
Detailed
information






3 TROUBLESHOOTING
3.5 List of Error Codes
3
81