Table of Contents
Advertisement
a.
ACTIVATING THE BLUETOOTH
You must activate your Bluetooth to establish a Bluetooth connection between your mobile
phone and other Bluetooth devices.
1.
Press Menu Key
Turn ON, SELECT.
2.
Continue pressing
QUICK ACCESS:
a.
Press More key.
b.
Scroll to Turn On Blue tooth, SELECT.
c.
Continue pressing
b.
SETTING TO LOW POWER MODE
1.
Press Menu Key
2.
Scroll to Handsfree, SELECT. Choose Car handsfree, SELECT.
3.
Choose Power Save, SELECT.
4.
Continue pressing
c.
PAIRING TO THE CELLULAR PHONE
1.
Bring the cellular phone at about 20 cm from the Car Kit.
2.
From the ON state, press the multi-function button for 10 seconds or until a distinctive
three-tone sound will be heard and at the same time, the Bluetooth indicator LED
changes from blinking blue to alternate blinking of red and blue. This indicates that the
unit is now ready for pairing.
3.
Press Menu Key
4.
Scroll to My Devices, SELECT. New Device, ADD. The phone will then search the
device to be added. After the device is found, press SELECT.
5.
Enter "0000" as the passkey and press OK. If the pairing is successful, the alternating
red/blue lights will stop. If pairing is unsuccessful, the steps above may be repeated.
6.
Continue pressing
The unit is now ready to link calls from the phone directly to the Car Kit. An icon, will appear
during the standby mode indicating that the Car Kit is linked with the phone.
d.
ANSWERING/RECEIVING A CALL
When the phone is receiving a call, a ring tone will be heard on the Car Kit.
1.
Just press the multi-function button down once to answer the call. Pressing the button
again will hang-up and terminate the call.
2.
If you wish to answer a call on the cellular phone, just press YES and the call is
automatically transferred to the phone. To transfer the call to the Car Kit, Press Menu
Key. Scroll to Transfer Sound and press SELECT. Choose the paired device and press
SELECT.
3.
To terminate the call, press the multi-function button again.
e.
MAKING A CALL with the Car Kit on
Normal dialing
1.
Enter the contact number and send. Audio can be heard on the Car Kit
simultaneously.
2.
Press the multi-function button to hang-up and terminate the call.
Voice dialing
Refer to step g and h for the procedure when activating and recording for voice dialing.
1.
Press the multi-function button once to activate the voice dialing.
USING WITH SONY ERICSSON Z600
. Scroll to Connectivity, SELECT. Bluetooth, SELECT. Choose
to exit.
to exit.
. Scroll to Connectivity, SELECT. Bluetooth, SELECT.
to exit.
. Scroll to Connectivity, SELECT. Bluetooth, SELECT.
to exit.
16
Advertisement
Table of Contents
