Table of Contents
Advertisement
a.
ACTIVATING THE BLUETOOTH
You must activate your Bluetooth to establish a Bluetooth connection between your mobile
phone and other Bluetooth devices.
1.
Go to Menu by pressing the joystick. Scroll to Connectivity, SELECT. Select Bluetooth,
SELECT. Turn On, SELECT.
2.
Continue pressing
b.
PAIRING TO THE CELLULAR PHONE
1.
Bring the cellular phone at about 20 cm from the Car Kit.
2.
From the ON state, press the multi-function button for 10 seconds or until a distinctive
three-tone sound will be heard and at the same time, the Bluetooth indicator LED
changes from blinking blue to alternate blinking of red and blue. This indicates that the
unit is now ready for pairing.
3.
Go to Menu by pressing the joystick. Scroll to Connectivity, SELECT. Select Bluetooth,
SELECT.
4.
Scroll to My devices, SELECT. New device, ADD. The phone is now searching for
pairable devices to be added. Select the device you want to pair with your cell phone.
Press SELECT.
5.
Enter "0000" as the passkey then press OK. If the pairing is successful, the alternating
red/blue lights will stop.
6.
Continue pressing
The unit is now ready to link calls from the phone directly to the Car Kit. An icon will appear
during the standby mode indicating that the Car Kit is linked with the phone.
c.
ANSWERING/RECEIVING A CALL
When the phone is receiving a call, a ring tone will be heard on the Car Kit.
1.
Just press the multi-function button down once to answer the call. Pressing the button
again will hang-up and terminate the call.
2.
If you wish to answer a call on the cellular phone, just press YES and the call is
automatically transferred to the phone. Pressing the multi-function button transfers the
call on the Car Kit.
3.
To terminate the call, press the multi-function button again.
d.
MAKING A CALL with the Car Kit on
Normal dialing
1.
Enter the contact number and press CALL button. Audio is automatically
transferred to the Car Kit.
2.
Press the multi-function button to hang-up and terminate the call.
Voice dialing
Refer to step g and h for the procedure when activating and recording for voice dialing.
1.
Press the multi-function button once to activate the voice dialing.
2.
A beep will then be heard on the Car Kit prompting the user to say the name of
the person to call.
3.
Say the name. The name will be played back to you. The phone will then place
the call automatically. In case the cell phone does not recognize the name
spoken, the steps above may be repeated.
4.
Press the multi-function button again to terminate the call.
Redialing
Press quickly the multi-function button twice to redial the last number.
USING WITH SONY ERICSSON T610
to exit.
to exit.
13
Advertisement
Table of Contents
