Sony LF-X1, LF-X5 Operating Instructions Manual page 61

Establishing the NetAV
connection
1
Turn on the monitor.
z
Tip
Make sure the monitor is in "On the go mode".
2
Touch anywhere on the screen.
The on-screen remote appears.
3
Select [NetAV].
[NetAV]
After a brief interval the monitor connects to your
base station at home, and
top of the screen. After
operate the monitor in the same way you do at
home.
z
• While connected with NetAV, the NetAV indicator
on the front of the base station lights green.
• You cannot use the sub-screen (LF-X1 only) or
settings screens in NetAV mode. Selecting a screen
other than TV, video input 1, or video input 2 in
NetAV mode automatically breaks the connection
with NetAV.
Quitting NetAV
Select [End] or turn off the monitor.
Changing TV channels
Using the on-screen remote, you can operate the
TV screen the same way you do at home. See
"Watching TV and Video" (1 page 65).
z
• You may not be able to watch some copyright
protected programs.
• When selecting a new channel on a NetAV
connection, there may be a delay before the picture
appears due to buffering.
Changing the TV picture size
In NetAV mode, you can change the size of the
TV picture on the monitor. Select [Resize]. A
dialog box for changing the TV picture size
appears at the
appears and you have three choices for the TV
appears, you can
picture size. With the factory default setting,
picture is displayed on the entire screen.
[NetAV]
Changing the streaming
In NetAV mode, you can change the streaming
according to the network status.
1
Connecting with NetAV
Tips
Tips
Select [Rate].
A dialog message for changing the
connection speed appears.
61
Continued