Sony LF-X1, LF-X5 Operating Instructions Manual page 31

5
For [CABLE], select [ON] or [OFF], then
select [Auto Program].
Note
To perform automatic channel set up for cable TV
(channels 1 to 125), select [ON] for [CABLE] in
step 5.
Channel scanning begins. It may take several
minutes to complete scanning.
6
When scanning ends successfully, the
message "Automatic channel scan has
finished." appears. After confirming this
message, select [OK].
7
Select [Back].
The [TV/Video] window reappears.
8
Select [Remote Settings].
The [Remote Settings] window appears.
9
Select [TV].
On the [Remote Settings] window, you can
configure the on-screen remote control.
The [TV] window appears.
Setting Up TV Channels
10
Select an Internal TV tuner, and then select
[Back].
The [Remote Settings] window reappears.
11
Select [Back], [Settings], then select [Exit].
The [TV/Video] window reappears.
12
Select [TV] in the [Index] window, then
touch anywhere on the screen.
The on-screen remote control appears.
13
Select a TV channel.
The TV channel you selected appears.
When you are finished...
• Go to page 37 to set up Internet and e-mail
options.
• Start watching TV (1 page 65).
[Settings]
31
Continued