Yamaha Rhino 700 Fi Owner's Manual page 64

Rebound damping setting:
Minimum (soft):
20 click(s) in direction b*
Standard:
12 click(s) in direction b*
Maximum (hard):
3 click(s) in direction b*
* With the adjusting screw fully turned in
direction a
TIP
Make sure that the position indicator mark is
aligned with the match mark when the shock
absorber assembly is set to the standard set-
ting.
Compression damping force
Turn the compression damping force adjust-
ing screw in direction a to increase the com-
pression damping force and thereby harden
the damping, and in direction b to decrease
the compression damping force and thereby
soften the damping.
1
2
3
1. Compression damping force adjusting screw
2. Position indicator mark
4-33
3. Match mark