Lt Cards Slots In 7360 Isam Fx-12 - Nokia 7360 Intelligent Services Access Manager FX Series Hardware Installation Manual

Installing cards in the 7360 ISAM FX-12 shelf
Figure 103
1
2
3
4
206

LT cards slots in 7360 ISAM FX-12

A: 60A B: 60A
External Alarms
BITS
NTA
GND
NTB
7360 ISAM FX-12
Remote
Craft
BAT A
BAT B
Alarms
Min. Maj. Crit.
ACO
GFC LT1 LT2 LT3
Alarm
Locate the free LT card slots for mounting the LT cards; see Figure 103.
Remove the LT card from its ESD protective bag. Wear the antistatic wrist strap.
Caution — Risk of damage by ESD when card is not connected.
This card contains devices that are susceptible to damage caused by
ESD in unconnected circuit conditions.
Carefully follow ESD safety precautions.
Ensure the insertion/extraction tabs on the card are in the unlocked position.
Slide the LT card in the appropriate LT card slot.
Caution — When sliding the LT card into slot 1, special attention is
required so that the solder side of the LT card does not come into contact
with the EMC shielding plate adjacent to the LT card slot. If not done
properly, this may cause damage at the solder side of the LT card.
3HH-12893-AAAA-TCZZA
ANSI Hardware Installation Manual
LT4 LT5 LT6 NTA NTIO NTB LT7 LT8 LT9
ENERGY HAZARD
ROATING FAN BLADES
KEEP FINGERS AWAY FROM
TOP AND BOTTOM OF FAN TRAY
DRAFT
LT10 LT11 LT12
24898
Issue: 09