ANSI Hardware Installation Manual
7.6.2.2
Observe the following.
Figure
Figure 58
Procedure 22
Use this procedure to install network termination (NT) cards in an 7360 ISAM FX-16.
A 7360 ISAM FX-16 has one or two NT cards:
Figure
Issue: 09
Cards with optical fiber connectors
Risk of eye damage or skin burns by laser emission.
Danger —
When installing optical cards or handling optical fibers, never
look inside connectors of cards or fibers when these are not
connected.
Put end caps on open connectors to protect against
unexpected emission.
Risk of damage by ESD when card is not
Caution —
connected.
This card contains devices that are susceptible to damage
caused by ESD in unconnected circuit conditions.
Carefully follow ESD safety precautions.
58
shows a laser classification label.
Laser classification label
To install NT cards
•
a single (first) NT card is inserted in slot NTA
•
a redundant card, if any, in slot NTB
59
shows the 7360 ISAM FX-16 NT cards in the slots.
3HH-12893-AAAA-TCZZA
Installing cards in the 7360 ISAM FX-16 shelf
CLASS 1 LASER PRODUCT
DRAFT
18256
133