Channel Swapping - Sony 3-293-880-11(1) Operating Instructions Manual

Corre-
sponding
channel
S25
S26
S27
S28
S29
S30
S31
S32
S33
S34
S35
S36
S37
S38
S39
S40
S41
AFT
On
Off
• If the Auto Fine Tuning function does not
work effectively, select "Off" and press m.
Press </, to obtain a clearer picture,
and press ENTER.
104
Channel Receivable
Set Frequency
number range (MHz)
CC28 331.25–339.25
CC29 339.25–347.25
CC30 347.25–355.25
CC31 355.25–363.25
CC32 363.25–371.25
CC33 371.25–379.25
CC34 379.25–387.25
CC35 387.25–395.25
CC36 395.25–403.25
CC37 403.25–411.25
CC38 411.25–419.25
CC39 419.25–427.25
CC40 427.25–435.25
CC41 435.25–443.25
CC42 443.25–451.25
CC43 451.25–459.25
CC44 459.25–467.25
Turns on the Auto Fine
Tuning function.
Normally select this position.
Allows you to adjust the
picture manually.
Sound System
Select an available TV system (page 103).
B/G Select this when in West
European countries, except
those listed in "Receivable
channels" on page 103.
D/K Select this when in East
European countries.
I Select this when in Great
Britain/Ireland.
L
Select this when in France.
Name
Changes or enters a new station name (up to
5 characters). The recorder must receive
programme position information (e.g.,
SMARTLINK information) for station
names to appear automatically.
Press ,, then press </, repeatedly to
select a character.
To change the characters, press M/m to
move the cursor, and press </,.
Decoder
Sets the external decoder (PAY-TV/Canal
Plus analogue decoder) channels.
For details, see page 30.

Channel Swapping

After the programme positions have been
set, you can change the order of each
programme position in the display list.
1
Press M/m to select the programme
position number you want to swap, and
press ,.
• To display other pages, press ./
> repeatedly.
2
Press M/m to select the programme
position number to swap for the one
selected in step 1, and press ENTER.
The programme position numbers are
swapped.
• To swap the programme position
number of another station, repeat from
step 1.