Using The Timer Menu - Sony FD TRINITON VEGA KV-20FS120 Operating Instructions Manual

Using the Timer
To access the Timer menu, refer to the following steps:
To Display To Highlight
v
Press to highlight an option, then press
Current Time Set your TV to the current day and time.
Press
1 Use the
2 Press
✍
You must set the Current Time before you can use Timer 1 and Timer 2.
Timer 1 and Use your timers settings to program your TV by day, time, duration and
Timer 2 channel. The timer's duration is maximum of 6 hours. When the channel
Scheduled is fixed, it is not necessary to set the channel.
viewing With the menu open, set cursor on Timer 1 or Timer 2:
1 Press
2 Press
press
3 Press
✍
You can set the Timer to On, Off, or Set. Once the timer is set, you can turn it On or Off without having to
go through the settings. When you set Timer 1 or Timer 2, a red light on the front panel of your TV will
turn on.
✍
When you perform Auto Program, Timer 1 and Timer 2 settings will be cleared. Also, in the event of any
loss of power, Current Time and Timer 1 and Timer 2 settings will be cleared.
30
Menu
To Select
b
to open Current Time menu:
V v
or button to enter the day and time, then press
to exit the menu.
V v
or to select Timer 1 or Timer 2, then press
V v
or to enter the desired day, time, duration and channel, then
. The Timer status should be On when the Timer has been set.
to exit the menu.
Timer
Timer 1 : Set
Timer 2 : Set
Current Time
.
Move
End
Select
.
.