Connecting Additional Equipment - Sony FD TRINITON VEGA KV-20FS120 Operating Instructions Manual

Connecting Additional Equipment

Connecting a TV and VCR
1
From
cable/
antenna
✍
To watch video programs from your VCR, tune your TV to channel 3 or 4 (as set on the rear of your
VCR).
1
Connect the coaxial cable from your TV antenna or cable service to the IN jack on your
VCR.
2
Connect a coaxial cable (not supplied) from the OUT jack on your VCR to the VHF/UHF
jack on the TV.
Optional connection
❏
If your VCR is equipped with video outputs, you can get better picture quality by
connecting Audio/Video cables (not supplied) from AUDIO and VIDEO OUT on your
VCR to AUDIO/VIDEO IN on your TV.
❏
For better picture quality, use S VIDEO instead of the yellow Audio/Video cable.
S VIDEO does not provide sound; the audio cables must still be connected.
✍
S VIDEO is only for KV-24FS120 model.
✍
You can use the
2
VCR
Optional connection
button to switch between the VHF/UHF and VIDEO inputs.
Rear of TV
Video (yellow)
Audio L (white)
Audio R (red)
7