Table of Contents
Advertisement
Figure 9-6: User role assignment
Repeat steps 1 through 5 for each user account
Click Save As... to save and name the new security control file.
Type a password for the security control file in the Current Password field and click OK.
9.6.5
Enable RBAC authentication on communication ports
Enabling RBAC authentication on communication ports secures access to the device. Connection to the
ports requires authentication with correct credentials. Select one of the methods described in this
section. Review the authentication options in
Table 9-7: Per-port RBAC authentication options
Port
security
Functionality
setting
Disabled
Does not perform any RBAC security functions on the port
Enables full security over the port to RBAC. If the administrator name and/or password
Enabled
are lost or forgotten, it will be necessary to reset to the factory default configuration.
Note that all data and the running configuration will be deleted.
Enables security over the port to RBAC but allows the electronic board security switch
Enable
to override RBAC security. If the administrator name and/or password are lost or
by
forgotten, RBAC may be disabled using the security switch. By setting the switch to
Security
the OFF position, a user may log in and reconfigure the security access. No data will be
Switch
lost.
9.6.5.1
Enable authentication from the RBCA security editor
1.
Select the preferred authentication option for each port
8 4 | XSE RI ES G5 | 2 10 6 02 6MNAA
Table
9-7.
(Figure
9-7).
Advertisement
Table of Contents
