ABB ACH580 Series User Manual page 78

ACH580 E-Clipse bypass and packaged drive user manual
Code
3306
3307
3308
3309
3310
Group 50: Bypass EFB
Code
5003
5008
5013
5040
5099
Name Resolution
DRIVE TYPE —
SUB ASMBLY —
PLANT CODE 1
MFG 1
DATE
UNIT 1
NUM
Name Resolution
BP MAC ID 1
BP OK MSG 1
TOKEN CNT 1
BP OB ID L 1
BP OB ID H 1
Group 33: Information
Range Default
—
—
0-9 0
0107 - 5299 0
00001 - 65535 0
Group 50: Bypass EFB
Range Default
0 - 65535 256 Bypass station ID (NODE ADDRESS)
0 - 65535 0 Contains a count of valid messages received by the
bypass.
During normal operation, this counter is increasing
constantly.
0 - 65535 0 Contains a count of the number of times the bypass
has received the token.
0 - 65535 0 BACnet Device object ID lower word.
The Bypass's Device object ID must be unique
across all BACnet devices in the building network.
Valid values are 0...4194303. The Device Object ID
is formed as a combination of parameter 5040 and
5099. To set an ID from 1 to 65535 set this
parameter = to the desired ID and set 5099 = 0. To
set an ID greater than 65535, set this parameter to
the lower 4 digits of the ID and set 5099 to the
remaining upper digits. For example, to set the ID to
71234, set the 5040 = 1234 and 5099 = 7. The
default values of 5040 = 0 and 5099 = 0 are
handled specially. This case uses parameter 5003,
the MAC ID as the value for the device object ID.
0 - 419 0 BACnet Device object ID upper word. See
parameter 5040 for description of how to use this
parameter.
Description
Drive Type - copy of drive's
parameter 07.03.
Bypass Sub assembly type.
Part of bypass serial number:
Shows 1 digit plant code. Identifies
the factory where the device was
made
Part of bypass serial number:
Shows 4 digit manufacturing date.
WWYY. (2 digits for the week
number 01-52 and 2 digits for the
year)
Part of bypass serial number:
Shows 5 digit unit number here.
Tells order number of a unit
manufactured during a certain
week. Maximum number is 65525.
Description
Parameters
69