C80 Series Connection and Setup Manual
11 CNC CPU Initial Setup
(b-3) Perform the device setting on CPU3 side of NC2.
Press [Next CPU] at the bottom right. Confirm that [CPU3] is displayed in the top right.
CPU3 (CNC CPU side): Setting example of three units of CNC CPU, 2-part system and 8 control
axes
(b-4) Perform the device setting on CPU4 side of NC2.
Press [Next CPU] at the bottom right. Confirm that [CPU4] is displayed in the top right.
CPU4 (CNC CPU side): Setting example of three units of CNC CPU, 2-part system and 8 control
axes
167
IB-1501452-C