Camshaft Position Actuator Oil Control Valves - Suzuki XL7 2007 Service Manual

5. Inspect the front of the right intake camshaft position
actuators for the following:
– Sprocket damage (1)
– Reluctor/sensor wheel damage (2)
– Camshaft position actuator oil control valve bolt
seating/sealing inner hub flange damage (3)
6. Inspect the back of the right intake camshaft position
actuators for the following:
– Sprocket damage (1)
– Camshaft locating pin damage (2)
– Camshaft seating/sealing inner hub flange
damage (3)
– Blockage to the oil passages (4)
– Loose or missing housing bolts (5)
7. Replace a damaged camshaft position actuator.

Camshaft Position Actuator Oil Control Valves

1. Inspect the camshaft position actuator oil control
valves for the following:
– Blockage to the oil passage (1)
– Missing or damaged oil screen clip (2)
– Blockage or damage to the oil screen (3)
– Damage to the sealing surface for the camshaft
position actuator oil control valve solenoid oil seal
(4)
– Damage to the bracket (5)
– Damage to the wiring harness connection and/or
terminals (6)
2. Replace a damaged camshaft position actuator oil
control valve.
Left Intermediate Sprocket with Primary and
Secondary Inverted Tooth (IT) Chain
1. Inspect the front of the left intermediate sprocket for
the following:
– Damage to the primary camshaft drive chain
sprocket (1)
Engine Mechanical: 1D-199