— Advanced Playback Operations —
Quickly locating a scene using
the zero set memory function
Using the zero set memory function, your
camcorder rewinds or advances the tape to
locate the desired scene, and the searching
automatically stops at the scene having a tape
counter value of "0:00:00." You can do this
with the Remote Commander.
(1) In playback mode, press DISPLAY if the
counter is not on the LCD screen or in the
viewfinder.
(2) Press ZERO SET MEMORY at the point you
want to locate later. The tape counter shows
"0:00:00" and the ZERO SET MEMORY
indicator flashes.
(3) Press x when you want to stop playback.
(4) Press m to rewind the tape to the tape
counter's zero point. The tape stops
automatically when the tape counter
reaches approximately zero. The ZERO SET
MEMORY indicator disappears and the
time code appears.
(5) Press N. Playback starts.
DISPLAY
Notes
• When you press ZERO SET MEMORY again
before rewinding the tape, the zero set
memory function will be canceled.
• There may be a discrepancy of several
seconds from the time code.
m
x
(1)
(2)
(3)
x
(4)
m
(5)
N
ZERO SET MEMORY
N
93