Recording A Still Image From Other Equipment - Sony Handycam DCR-VX2100E Operating Instructions Manual

Recording an image from a
tape as a still image
Recording a still image from
other equipment
(1) Set the POWER switch to VCR on your
camcorder and set DISPLAY in
in the menu settings.
(2) Play back the recorded tape, or turn the TV
on to see the desired program.
The picture from the other equipment
appears on the LCD screen or in the
viewfinder.
(3) Follow steps 3 and 4 on page 187.
When recording an image through
the VIDEO jack
: Signal flow/
Connect the yellow plug of the A/V
connecting cable supplied with your
camcorder to the video output jack on the VCR
or the TV.
Connect using an S video cable (optional) to
obtain high-quality pictures
With this connection, you do not need to
connect the yellow (video) plug of the A/V
connecting cable.
Connect an S video cable (optional) to the S
video jacks of both your camcorder and the
VCR/TV.
This connection produces higher quality DV
format pictures.
to LCD
S VIDEO
S VIDEO cable (optional)/
VIDEO
A/V connecting cable (supplied)/
(1)
(2)
(3)
OUT
S VIDEO
VIDEO
189